Products
Rack Mounted Transceivers/Repeaters - VHF / UHF (12-49-0000)
The 12-49 series of 19" x 1U rack mountable repeaters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts.
By adding a power amplifier within the 1U rack the unit becomes a powerful 25W output store & forward paging repeater.
Available Protocols: Salcom, TAP/PET, TNPP, ESPA.4.4.4, Ascom, Gaming, Austco, Match, Gent, GPS & Pulse Count, SMS, Scope, Comp1, Comp2 & Gaming
Salcom has further developed its range of rack systems in order to provide off-the-shelf 1U 19 inch solutions for paging and telemetry.
These racks provide a conveniently packaged selection of standard Salcom core products that can easily be added to your server rack.
The 12-49 series of transceivers/repeaters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts, with 25W output also being a configurable option when a power amplifier is also added.
They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.
In addition to a direct/RS232 buffered serial port, an on-board USB port enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.
The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, TAP/PET, TNPP, ESPA.4.4.4, Ascom, Austco, Match, Gent, GPS & Pulse Count, SMS, Scope, Comp1, Comp2 & Gaming. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB port.
Four discrete inputs are supported which may be used to initiate relay commands for remote control applications.
For paging applications a different pre-programmed message can be assigned to an input on high and/or low transition. The unit also supports low voltage detection on the power input.
Configuration of the transmitter is performed via the USB port or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.
The 12-49 is housed in an attractive 19" x 1U rack.
Please also see the 12-49 Transmitter (only) options in the Transmitters product section.
| Transmitter | |
| Model | 12-62-0000 VHF/UHF Transmitter |
| Frequency Range VHF | 148 - 164 MHz - VHF (Model No. 12-62-00150) |
| Frequency Range UHF | 427.5 - 475 MHz UHF (Model No. 12-62-0450) |
| Frequency Selection | User Configurable |
| Power Supply | +13.8V typical (11-15 VDC range) |
| Power Consumption | Low Power Mode: 17.5mA Standby: 40mA Transmit: 1.2A @ 4W |
| Transmit Power | 50mW, 100mW, 250mW, 500mW, 1W, 2W, 5W, 25W (25W possible via Salcom Power Amplifier) |
| Channel Spacing | 5kHz, 6.25kHz, 10kHz, 12.5kHz, 25kHz |
| Modulation | FSK with NRZ data |
| Deviation | ±2.25kHz or ±4.5kHz |
| Transmit Duty Cycle | 50%; Maximum 5 minutes on time |
| Baud Rates | 512,1200 |
| Message Format | POGSAC |
| Configuration Application | 12-62 Configuration Tool |
| Programming Cable | Mini USB 12-45-0000 (RJ12 to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| Receiver | |
| Frequency Range | 148-165MHz - VHF (Model No. 12-84-7150) 440-480MHz - UHF (Model No. 12-84-7450) Note: 80MHz to 900MHz available on request |
| Frequency Selection | User configurable Note: VHF model is only adjustable by ±5MHz from (customer defined) factory preset frequency |
| Power Supply | +13.8V typical (11 to 15 VDC range) |
| Power Consumption | Standby: 40mA Relays: 18mA per energised relay |
| Modulation | FSK with NRZ data |
| Receiver Sensitivity | Approx -124 dBm |
| Baud Rates | 512, 1200 |
| Message Format | POCSAG |
| Configuration Application | 12-84 Configuration Tool |
| Programming Cable | 12-45-0000 (RJ12 to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| Serial Port | 9600 , N, 8, 1; RS232 |
| Discrete Outputs | 2 Relay Contacts (1A @ 24VDc); 2 Open Collector (100mA max) Note: Not suitable for 240VAC Connections |
| Connectors | Serial Port (RS232) = RJ12 (6P6C) Outputs (Relay / Open Collector) = RJ45 (8C) |
| Power Connector | 2-way plug & socket, screw connections (supplied) |
| RF Connector | 50Ω BNC (Product supplied with aerial) |
| Environmental Protection | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| Operating Temperature | -10ºC to +50ºC (+14ºF to +122ºF) |
| Indicators | Power LED (Green) - Slow Flashing = Normal Operation - Solid (up to 5s) = Receiving Data Status LED (Red) - Flashing = Error Condition |
Salcom has further developed its range of rack systems in order to provide off-the-shelf 1U 19 inch solutions for paging and telemetry.
These racks provide a conveniently packaged selection of standard Salcom core products that can easily be added to your server rack.
The 12-49 series of transceivers/repeaters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts, with 25W output also being a configurable option when a power amplifier is also added.
They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.
In addition to a direct/RS232 buffered serial port, an on-board USB port enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.
The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, TAP/PET, TNPP, ESPA.4.4.4, Ascom, Austco, Match, Gent, GPS & Pulse Count, SMS, Scope, Comp1, Comp2 & Gaming. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB port.
Four discrete inputs are supported which may be used to initiate relay commands for remote control applications.
For paging applications a different pre-programmed message can be assigned to an input on high and/or low transition. The unit also supports low voltage detection on the power input.
Configuration of the transmitter is performed via the USB port or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.
The 12-49 is housed in an attractive 19" x 1U rack.
Please also see the 12-49 Transmitter (only) options in the Transmitters product section.
| Transmitter | |
| Model | 12-62-0000 VHF/UHF Transmitter |
| Frequency Range VHF | 148 - 164 MHz - VHF (Model No. 12-62-00150) |
| Frequency Range UHF | 427.5 - 475 MHz UHF (Model No. 12-62-0450) |
| Frequency Selection | User Configurable |
| Power Supply | +13.8V typical (11-15 VDC range) |
| Power Consumption | Low Power Mode: 17.5mA Standby: 40mA Transmit: 1.2A @ 4W |
| Transmit Power | 50mW, 100mW, 250mW, 500mW, 1W, 2W, 5W, 25W (25W possible via Salcom Power Amplifier) |
| Channel Spacing | 5kHz, 6.25kHz, 10kHz, 12.5kHz, 25kHz |
| Modulation | FSK with NRZ data |
| Deviation | ±2.25kHz or ±4.5kHz |
| Transmit Duty Cycle | 50%; Maximum 5 minutes on time |
| Baud Rates | 512,1200 |
| Message Format | POGSAC |
| Configuration Application | 12-62 Configuration Tool |
| Programming Cable | Mini USB 12-45-0000 (RJ12 to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| Receiver | |
| Frequency Range | 148-165MHz - VHF (Model No. 12-84-7150) 440-480MHz - UHF (Model No. 12-84-7450) Note: 80MHz to 900MHz available on request |
| Frequency Selection | User configurable Note: VHF model is only adjustable by ±5MHz from (customer defined) factory preset frequency |
| Power Supply | +13.8V typical (11 to 15 VDC range) |
| Power Consumption | Standby: 40mA Relays: 18mA per energised relay |
| Modulation | FSK with NRZ data |
| Receiver Sensitivity | Approx -124 dBm |
| Baud Rates | 512, 1200 |
| Message Format | POCSAG |
| Configuration Application | 12-84 Configuration Tool |
| Programming Cable | 12-45-0000 (RJ12 to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| Serial Port | 9600 , N, 8, 1; RS232 |
| Discrete Outputs | 2 Relay Contacts (1A @ 24VDc); 2 Open Collector (100mA max) Note: Not suitable for 240VAC Connections |
| Connectors | Serial Port (RS232) = RJ12 (6P6C) Outputs (Relay / Open Collector) = RJ45 (8C) |
| Power Connector | 2-way plug & socket, screw connections (supplied) |
| RF Connector | 50Ω BNC (Product supplied with aerial) |
| Environmental Protection | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| Operating Temperature | -10ºC to +50ºC (+14ºF to +122ºF) |
| Indicators | Power LED (Green) - Slow Flashing = Normal Operation - Solid (up to 5s) = Receiving Data Status LED (Red) - Flashing = Error Condition |
